(Video) Vacuum Infusion Using Fibre Glast Materials

In this video, R Miller Autobody makes a custom car part through vacuum infusion using Fibre Glast materials.

R Miller Autobody recently used Fibre Glast materials in a vacuum infusion application. Vacuum Infusion is a technique that uses vacuum pressure to drive resin into a laminate. Dry materials are laid into the mold and the vacuum pressure is applied before resin is introduced. Once a complete vacuum is achieved, resin is forced into the laminate via vacuum tubing. The vacuum infusion process offers a better fiber-to-resin ratio than hand lay-up or vacuum bagging.

Fibre Glast Material List
#251 Continuous Strand Mat
#580-A Yellow Sealant Tape
#582 Nylon Release Peel Ply
#891-A Vacuum Connector
#893 Vacuum Tubing
#1093 Unidirectional E-Glass
#1401 EnkaFusion Nylon Matting
#1403 Spiral Tubing
#1408 Lantor Soric XF
#1688 Stretchlon 800 Bagging Film

Sign Up for the Fibre Glast Newsletter

Related Posts

1 comment

1 david sligar { 06.01.14 at 4:16 am }

love your products and videos. rmillerautobody.com does beautiful work. I am always looking for exciting applications to keep my student interested in composites.

Leave a Comment